Ultrafine Mill is also called three-ring micro-powder mill which is widely used for super powder producing. the output size can reach 2500mesh (5um). Ultrafine Powder Mill is the latest type of product of micro-powder mill that leads the world tide. Ultrafine Powder Mill series SCM is developed based on our company’s more than 15 years’ production experience. We absorbed advantages from the same trade at home and abroad. We reviewed, researched and tried on 12 kinds of mills and horizontal hammer crushers.
Ultrafine Powder Mill series SCM is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, etc.
The Advantages of Ultrafine Powder Mill series SCM
Ultrafine Powder Mill series SCM has high efficiency and low cost. The capacity of Ultrafine Powder Mill series SCM is raised by 40% compared with airflow mill and mix mill on the condition that the materials, the drive and the fineness of the final powder are the same.
1. High capacity and low consumption.
2. Advanced grinding cavity design.
3. High quality grinding media.
4. Advanced intelligent speed control device.
5. Large range of fineness adjusting.
Working Principle of Ultrafine Powder Mill series SCM:
The motor of Ultrafine Powder Mill series SCM drives the main shaft and every turnplate round through the reducer. The reducer drives dozens of rollers to rotate against race way of ring through pin. Small material crushed is transported into hopper by elevator, and then vibrating feeder shall feed material to the central part of upper turnplate evenly. The material falls to circle under the centrifugal force and comes down to raceway of ring to be crushed into powder. After grinded in the first race way, the material goes to the second and third turnplate. The blower inhales the external air into the mill and carries the powder after third turnplate into powder-separator. Turbine in the separator makes the coarse powder drop down and regrinded and the fine powder shall go into cyclone powder collector together with air current and go down through discharge valve as final product; at the same time, air current with a little dust goes out through blower and muffler after purified by filter.
Main Specifications of Ultrafine Powder Mill series SCM:
| Model |
SCM6015 |
SCM8021 |
SCM10027 |
| Number of Roller (piece) |
15 |
21 |
27 |
| Ring Diameter (mm) |
Φ600 |
Φ800 |
Φ1000 |
| Number of Ring (piece) |
1×3 |
1×3 |
1×3 |
| Mai n Equipment Rotate Speed (r/min） |
235 |
235 |
173 |
| Max. Inlet Size (mm) |
≤10 |
≤10 |
≤20 |
| Final Size (mesh) |
325~2500 |
325~2500 |
325~2500 |
| Capacity (kg/h) |
325~2500 |
600~4000 |
900~6800 |
| Overall Size (m) |
10×2.3×5.5 |
13×3×5.8 |
18×4×8.6 |
Specifications of Ultrafine Powder Mill series SCM:
| Name |
Item |
Unit |
Specification and Technical Data |
| SCM6015 |
SCM8021 |
SCM10027 |
| Motor of Main Machine |
Model |
|
Y225s-4 |
Y250M-4 |
Y315S-4 |
| Power |
KW |
37 |
55 |
110 |
| Classifier Frequency Modulation Motor |
Model |
|
Y160M-4 |
Y180M-4 |
Y200L1-4 |
| Power |
KW |
11 |
18.5 |
30 |
| Motor of Elevator |
Model |
|
Y100L-4 |
Y100L-4 |
Y100L-4 |
| Power |
KW |
3 |
3 |
3 |
| Motor of Blower |
Model |
|
Y200L1-2 |
Y225M-2 |
Y280M-2 |
| Power |
KW |
30 |
45 |
90 |
| Hammer Crusher |
Model |
|
PC250X400 |
PC300X400 |
PC400X600 |
| Power |
KW |
15 |
15 |
18.5 |
| Vibrating Feeder |
Model |
|
GZ1F |
GZ1F |
LS180X1050 |
| Power |
KW |
0.06 |
0.06 |
0.2 |
| Discharge Value |
Model |
|
ZJD1:40 |
ZJD1:40 |
ZJD1:40 |
| Power |
KW |
0.75 |
0.75 |
0.75 |
| Pulsed Duster |
Model |
|
DMC72-Ⅱ |
DMC120-Ⅱ |
DMC120-Ⅱ |
Note: This specification is just reference, any changes are subject to the SCM Series Super Thin Mill products.
Gallery of Ultrafine Powder Mill series SCM:
Online Service
