Coarse Powder Mill series MXB is a new high-tech grinding machine. Based on our 23-years research experience in the grinding industry, Coarse Powder Mill series MXB is the ideal equipment to replace the Raymond Mill, ball mill, and other traditional mills which only produce fine powder materials. This grinding machine is mainly used for coarse powder and small size of sand producing. 70-80% of the output size can reach of 1-2mm, so the percentage of sand produced by this machine is higher.
The wearing material of Coarse Powder Mill series MXB is designed by our wearing-resistant laboratory, and the lifetime of Coarse Powder Mill series MXB is three times longer than that of Raymond Mill. Coarse Powder Mill series MXB is efficient equipment and widely used in quartz, silica, foundry, fine sand and other sand abrasive industries. As a component of a closed production line, it can produce various sizes of powder.
The Advantages of Coarse Powder Mill series MXB:
1. High quality wearing parts, longer service life.
2. Higher percentage of sand product.
3. Better desulfurization effect.
4. Reasonable final size which can be controlled by the impellor speed.
5. Wide range of application
Working Principle of Coarse Powder Mill series MXB:
Step with the main shaft, bulk disk and roller bracket is driven by motor through reducer. Installed above bracket, roller assembly rotates with the main shaft and swings freely meantime, this bring a large centrifugal force, which scatters bulk materials evenly in grinding intermediate layer between central roller and ring. The bulk materials are grinded into powder and fall on the bottom, and then discharged from discharging opening under the effect of synchronously-rotating scraper.
Specifications of Coarse Powder Mill series MXB:
| Model |
MXB904 |
|
| Number of Roller |
4(piece) |
|
| Maximum Feeding Grain Size |
<30 mm |
(Hard Material)<20mm |
| Open Circuit finished sized |
70 – 90 % < 2 mm |
Adjustable, reference Instruction below |
| Open System Capacity |
8 – 15 t/h |
Be involved with the average size and hardness of the feeding |
| Main Motor Powder |
37 – 45 KW |
Fines， Low production with small motor |
| Main Motor Model |
Y225-4 |
45KW |
| Elevator Power |
3X1.1 KW |
|
| Contour (LXWXH) |
2.01X2.03X2.79(m) |
Including main motor gear box main unit |
| Maximum Lifting weight of Single Piece |
4.81 |
Refer to the individual pieces can not be disconnected |
| Cross Weight (Except Electric) |
13.71 |
|
parameter of Support equipments for Coarse Powder Mill series MXB
| Name |
Model |
Power |
Description |
| JC Jaw Crusher |
JC250×1000 |
30kW |
Speed≥1m/s |
| Bucket Elevator |
TH250 |
3kW |
|
| Vibrating Feeder |
GZ3F |
0.2kW |
Space between inlet and outlet is 1000 |
Note: This specification is just reference, any changes are subject to the MXB coarse powder mill products.
Gallery of Coarse Powder Mill series MXB:
Online Service
