Spring Cone Crusher series PY is widely applied to crush various kinds of ores and rocks of medium or above medium hardness. Compared with jaw crushers, Spring Cone Crusher series PY has the advantages of stable structure, high efficiency, easy adjustment, economic operation, etc. The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber without damaging the cone crusher.
The safety system of Spring Cone Crusher series PY uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon the size of feeding and fineness of crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
The Advantages of Spring Cone Crusher:
1. high productivity; high quality
2. less machine stop time
3. easy maintenance and low cost
4. unique crushing ability in primary, secondary and tertiary crushing
Working Principle of Spring Cone Crusher:
Spring Cone crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency efficient than jaw crusher. The movable cone of Spring Cone crusheris supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Specifications of Spring Cone Crusher:
| Model |
Max. Feed Size(mm) |
Adjustable range of Discharging Opening(mm) |
Capacity(t/h) |
Motor Power(kW) |
diameter of cone crusher at big end(mm) |
Weight(t) |
PYB |
600 |
75 |
12-25 |
40 |
30 |
Ф600 |
5 |
| PYZ |
35 |
3-13 |
5-23 |
5.3 |
| PYB |
900 |
115 |
15-50 |
50-90 |
55 |
Ф900 |
11.2 |
| PYZ |
60 |
5-20 |
20-65 |
11.2 |
| PYD |
50 |
3-13 |
15-50 |
11.3 |
| PYB |
1200 |
145 |
20-50 |
110-168 |
110 |
Ф1200 |
24.7 |
| PYZ |
100 |
8-25 |
42-135 |
25 |
| PYD |
50 |
3-15 |
18-105 |
25.3 |
| PYB |
1750 |
215 |
25-50 |
280-480 |
160 |
Ф1750 |
50.3 |
| PYZ |
185 |
10-30 |
115-320 |
50.3 |
| PYD |
85 |
5-13 |
75-230 |
50.2 |
| PYB |
2200 |
300 |
30-60 |
490-750 |
260-280 |
Ф2200 |
80 |
| PYZ |
230 |
10-30 |
200-580 |
80 |
| PYD |
100 |
5-15 |
125-340 |
81.4 |
Note: This specification is just reference, any changes are subject to the Spring Cone Crusher products
Gallery of Spring Cone Crusher:
Online Service
